BENTLY NEVADA 330180-90-05 Vibration Monitoring

BENTLY NEVADA 330180-90-05 Vibration Monitoring

1900/27 is a single channel, independent, locally installed vibration monitor. It can serve as an independent mechanical protection device, suitable for general or some necessary machines, and provides an interface system for monitoring parameter trends in built-in 4-20 mA factory control and automation. 1900/27 accepts input from a compatible single transducer into the Trendmaster2000 accelerometer, causing the signal to reach the peak speed unit

By using the optional Rack Buffered Output Sensor Interface Module (TIM), the 1900/27 can also be used with our Trendmaster 2000 system. It allows users to apply mechanical protection functions to all (or selected) seismic vibration points of the Trendmaster 2000 system.

125840-02 has added high-performance PLCs and expanded the existing controller PLC platform. The significant improvement in performance is attributed to the increase in computing power and memory capacity. This new performance class can achieve a cycle time of 25 seconds per 1000 rows of STL. By introducing high-performance PLC, 125840-02 has expanded its modular control system for PLC and motion control tasks. The characteristic of high-performance PLC is its compact design, which is part of the controller PLC series. The I/O module can be directly connected to the controller PLC without the need for additional bus couplers. The control concept of high-performance PLC can be fully integrated into all Bau ü ller control platforms, and its software is 100% compatible. The controller PLC series has up to five different fieldbus module interfaces for PLCs.

The GE/Bently Nevada 3500/05 system rack design can accommodate all 3500 monitor modules and rack power supplies. It allows various 3500 modules to communicate with each other and allows power to be allocated to each module as needed. Full size rack: 19 inch EIA rack with 14 available module slots 2. Mini rack: 12 inch rack with 7 available module slots. 3500 racks are manufactured in three formats: 1. Panel installation: This rack format is installed on a rectangular cut in the panel and secured to the panel using the fixture provided with the rack. The wiring connections and I/O modules can be operated from the rear of the rack.
2. Rack installation: This rack format installs 3500 racks on 19 inch EIA rails_ On. The wiring connections and I/O modules can be operated from the rear of the rack. 3. Partition installation: When it is not possible to operate from the rear of the rack, this rack format can install the rack on a wall or panel. The wiring connections and I/O modules can be accessed from the front of the rack. The 3500/05 micro rack does not have this format. The power supply and rack interface module must be located in the leftmost rack position. The remaining 14 rack positions (7 rack positions for micro racks) can be used for any module combination.

[Disclaimer]
Our company sells new products and discontinued products, and purchases such special products through independent channels. Guizhou Yuanmiao Automation Equipment Co., Ltd. is not an authorized distributor, distributor or representative of the featured products of this website. All product names/product images, trademarks, brands and microlabels used on this website are the property of their respective owners. Product descriptions, descriptions or sales with these name images, trademarks, brands and logos are for identification purposes only and do not represent any association or authorization with any right holders.