3500/22-01-01-01 Transient Data Interface
3500/22-01-01-01 features
In the 3500 rack, TDI is located in the slot next to the power supply. In order to continuously collect steady-state and transient dynamic (waveform) data and transmit this data to the host software through an Ethernet link, it interacts with M-series monitors (3500/40M, 3500/42M, etc.).
TDI has traditional static data collection capabilities. However, TDI can also use optional channels to enable disk recording of dynamic, high-resolution transient data.
Function Description
The 3500 rack contains communication processing functions for TDI. Although TDI performs some tasks shared by the entire rack, it is not a critical component of the monitoring system and is not related to the effectiveness of autonomous mechanical protection in monitoring the entire system.
Each 3500 rack requires one TDI or RIM, which always occupies slot 1. (Next to the power supply).
The link between the 3500 monitoring system and compatible software is called the 3500/22M Transient Data Interface (TDI) (System 1 status monitoring and diagnostic software and 3500 system configuration software). TDI combines the 3500/20 Rack Interface Module (RIMfunctionality) with a communication processor (such as TDXnet) to collect data.
place
In the 3500 rack, TDI is located in the slot next to the power supply. In order to continuously collect steady-state and transient dynamic (waveform) data and transmit this data to the host software through an Ethernet link, it interacts with M-series monitors (3500/40M, 3500/42M, etc.). TDI has traditional static data collection capabilities. However, TDI can also use optional channels to enable disk recording of dynamic, high-resolution transient data.
The 3500 rack contains communication processing functions for TDI. Although TDI performs some tasks shared by the entire rack, it is not a critical component of the monitoring system and is not related to the effectiveness of autonomous mechanical protection in monitoring the entire system.
Each 3500 rack requires one TDI or RIM, which always occupies slot 1. (Next to the power supply).
Configure key lock
It is used to switch the 3500 rack between “RUN” and “GRAM” modes. RUN mode can prevent configuration modifications while allowing the rack to operate normally. The rack can be configured locally or remotely, while still operating normally in Program mode. The switch can be kept in the running or programming position by removing the key from any position on the rack. You can prevent unnecessary rack reconfiguration by locking the switch in the running position. Whenever remote reconfiguration of the rack is required, the switch can be locked in the Program position.
I/O module signal common terminal
Both versions of TDI I/O modules now have a 2-pin connector used to connect the signal common terminal to the single point instrument ground of the rack. After performing this operation, to isolate the signal common terminal from the chassis (safety) ground, slide the selector switch on the power input module (PIM) side in the direction of the “HP” arrow.
Attention: Due to the large number of products from our company, the pictures cannot match each other. Please contact me to confirm the actual product!
Related product videos:
.Our company is committed to through the installation of control systems for spare parts service for you and drive to provide spare parts support, we have a lot of internal inventory, including (DCS, PLC, CNC), the panel controller and HMI, industrial PC, drive, power supply and production control system and servo motor parts, reduce the maintenance cost of spare parts of you, We’ve also released a lot of new hardware to help support your existing installation or take advantage of the latest technology.
Product series：
PLC and DCS system spare modules from world-renowned brands
Allen Bradley (AB) series products from the United States
Schneider series products
General Electric Series Products
Westinghouse Series Products
Selling ABB Robots FANUC Robots、YASKAWA Robots、KUKA Robots、Mitsubishi Robots、OTC Robots、Panasonic Robots、MOTOMAN Robots。
Estinghouse: OVATION system, WDPF system, MAX1000 system spare parts.
Invensys Foxboro: I/A Series system, FBM (Field Input/Output Module) sequential control, ladder logic control, accident recall processing, digital to analog conversion, input/output signal processing, data communication and processing, etc. Invensys Triconex: Redundant fault-tolerant control system, the most modern fault-tolerant controller based on Triple Modular Redundancy (TMR) structure.
Motorola: MVME 162, MVME 167, MVME1772, MVME177 and other series.
Foxboro: I/A Series system, FBM full series (on-site input/output modules)
Sequential control, trapezoidal logic control, accident recall processing, digital to analog conversion, input/output signal processing
Data communication and processing, etc.
Westinghouse: 1C31 series DCS system, CPU, OVATION system, WDPF system
WEStation system spare parts.
Triconex: Redundant fault-tolerant control system, modern fault-tolerant controller based on Triple Modular Redundancy (TMR) structure.
Emerson: various spare parts such as modules, cards, drives, etc.
ABB: PM full range DCS system, IGCT high-voltage inverter series, industrial robot spare parts DSQC series, INFI 90, etc.
Bailey: BRC series DCS system, etc.
Allen Bradley: 1756, 1785, 1771, 1746 full series systems, etc.
Yokogawa: CP series, etc.
Honeywell: TK/TC/CC systems, etc.
Reliance: 57C series, etc.
Schneider: 140 series processors, control cards, power modules, etc.
Modicon: Spare parts for AS series PLC systems.
Siemens MOORE, Siemens Simatic C1, Siemens CNC system, etc.
Motorola: MVME 162, MVME 167, MVME1772, MVME177 and other series.
XYCOM: I/O, VME board, and processor, etc.
GE (General Electric): IC698/IC697 full range of PLC systems, modules, cards, drivers, and other spare parts.
Yaskawa: Servo controller, servo motor, servo drive.
Bosch Rexroth: Indramat, I/O modules, PLC controllers, drive modules, etc.
Woodward: SPC valve position controller, PEAK150 digital controller
XYCOM: I/O, VME board, and processor, etc.
Related products：
| BENTLY | 3500/15 |
| BENTLY | 3500/20 |
| BENTLY | 125840-02 |
| BENTLY | 3500/53 |
| BENTLY | 1X35668 |
| BENTLY | 3500/22M |
| BENTLY | 3500/22M |
| BENTLY | 3500/25 |
| BENTLY | 3500/42M |
[Disclaimer]：
Our company sells new products and discontinued products, and purchases such special products through independent channels. Guizhou Yuanmiao Automation Equipment Co., Ltd. is not an authorized distributor, distributor or representative of the featured products of this website. All product names/product images, trademarks, brands and microlabels used on this website are the property of their respective owners. Product descriptions, descriptions or sales with these name images, trademarks, brands and logos are for identification purposes only and do not represent any association or authorization with any right holders.
Related products: https://www.2mwww.com/product-category/bently/
