3500/62-04-00 Programmable Control System BENTLY
The 3500/62 process variable monitor is a six channel monitor used for
Key parameters that require continuous monitoring on monitoring machinery, such as pressure, flow rate, and temperature
Degree, level, etc.). This monitor can accept a current input of+4 to+20mA
Input voltage proportional values within the range of -10 to+10Vdc. It will
Process these signals and then compare them with user programmable alarm values.
3500/62 can be programmed with 3500 framework configuration software to execute voltage or
Current measurement. 3500/62 provides corresponding signals based on three input forms
I/O module:+/-10V DC, insulated 4-20mA and 4-20mA with
Intrinsically safe Zener barrier. The internal safety barrier I/O has an external power input terminal
Provide inherently safe power supply for 4-20mA sensors.
The main functions of the 3500/62 monitor are:
1) Continuously compare the current process variable with the configured alarm setpoint, using
Activate the alarm to protect the machinery.
2) Provide important machine information for operators and maintenance personnel.
When using Triple Modular Redundancy (TMR) configuration, process variable monitoring
The device must be installed in groups of three in adjacent positions. There are two types of this arrangement
Voting format can be used to ensure precise operation and avoid single point failures.
This configuration method adopts two voting forms to ensure precise operation.
The types of monitors available in the 3500 system are summarized in Table 1. Each monitor occupies one slot in the framework.
All monitors are designed based on microprocessors and can digitally adjust warning and danger setpoints for each channel. The alarm can be configured as a locked or non locked operation.
The status of each monitor and channel is displayed through bright LEDs on the front panel, allowing for direct observation without the need for operator intervention, making the operation simpler and more convenient. Most monitors can output a proportional value of 4 to 20mA for each channel through I/O modules and connect to paper tape recorders or older process control systems without digital interfaces. The short-circuit protection terminal on the I/O module of the monitor can provide power to the sensor. The OK detection path within each monitor continuously checks the integrity of each sensor and its corresponding field connection.
The sensor output signal is buffered and transmitted to the coaxial connector on the front panel. The rear of the RIM I/O module has buffered output terminals.
Product series：
PLC and DCS system spare modules from world-renowned brands
Allen Bradley (AB) series products from the United States
Schneider series products
General Electric Series Products
Westinghouse Series Products
Selling ABB Robots FANUC Robots、YASKAWA Robots、KUKA Robots、Mitsubishi Robots、OTC Robots、Panasonic Robots、MOTOMAN Robots。
Estinghouse: OVATION system, WDPF system, MAX1000 system spare parts.
Invensys Foxboro: I/A Series system, FBM (Field Input/Output Module) sequential control, ladder logic control, accident recall processing, digital to analog conversion, input/output signal processing, data communication and processing, etc. Invensys Triconex: Redundant fault-tolerant control system, the most modern fault-tolerant controller based on Triple Modular Redundancy (TMR) structure.
Motorola: MVME 162, MVME 167, MVME1772, MVME177 and other series.
Foxboro: I/A Series system, FBM full series (on-site input/output modules)
Sequential control, trapezoidal logic control, accident recall processing, digital to analog conversion, input/output signal processing
Data communication and processing, etc.
Westinghouse: 1C31 series DCS system, CPU, OVATION system, WDPF system
WEStation system spare parts.
Triconex: Redundant fault-tolerant control system, modern fault-tolerant controller based on Triple Modular Redundancy (TMR) structure.
Emerson: various spare parts such as modules, cards, drives, etc.
ABB: PM full range DCS system, IGCT high-voltage inverter series, industrial robot spare parts DSQC series, INFI 90, etc.
Bailey: BRC series DCS system, etc.
Allen Bradley: 1756, 1785, 1771, 1746 full series systems, etc.
Yokogawa: CP series, etc.
Honeywell: TK/TC/CC systems, etc.
Reliance: 57C series, etc.
Schneider: 140 series processors, control cards, power modules, etc.
Modicon: Spare parts for AS series PLC systems.
Siemens MOORE, Siemens Simatic C1, Siemens CNC system, etc.
Motorola: MVME 162, MVME 167, MVME1772, MVME177 and other series.
XYCOM: I/O, VME board, and processor, etc.
GE (General Electric): IC698/IC697 full range of PLC systems, modules, cards, drivers, and other spare parts.
Yaskawa: Servo controller, servo motor, servo drive.
Bosch Rexroth: Indramat, I/O modules, PLC controllers, drive modules, etc.
Woodward: SPC valve position controller, PEAK150 digital controller
XYCOM: I/O, VME board, and processor, etc.
Related products：
| BENTLY | 3500/15 |
| BENTLY | 3500/20 |
| BENTLY | 125840-02 |
| BENTLY | 3500/53 |
| BENTLY | 1X35668 |
| BENTLY | 3500/22M |
| BENTLY | 3500/22M |
| BENTLY | 3500/25 |
| BENTLY | 3500/42M |
[Disclaimer]：
Our company sells new products and discontinued products, and purchases such special products through independent channels. Guizhou Yuanmiao Automation Equipment Co., Ltd. is not an authorized distributor, distributor or representative of the featured products of this website. All product names/product images, trademarks, brands and microlabels used on this website are the property of their respective owners. Product descriptions, descriptions or sales with these name images, trademarks, brands and logos are for identification purposes only and do not represent any association or authorization with any right holders.
Related products: https://www.2mwww.com/product-category/bently/
