3500/42 Transient Data Interface Module
3500/42M Technical Features
input
Accept signals from one to four proximity, acceleration, or velocity sensors.
Power consumption is 7.7 watts.
output
When the monitoring module is working normally, the OK LED light is on.
When the earthquake monitoring module is connected to other modules in the 3500 rack, the TX/RX LED lights up.
If the earthquake monitor is in bypass mode, the bypass LED indicator will light up.
Buffer sensor: Each channel has its own coaxial connector on the front of the display. Each connector is equipped with built-in short-circuit protection.
550 ohm output impedance
Axis power supply -24 Vdc
Resolution 0.3662A per bit
Sensor power supply -24 Vdc
Absolute output impedance of 300 ohms
signal processing
Temperature: 25 degrees Celsius
Radial vibration
User programmable direct filter
Unipolar, -3db at 4 Hz to 4000 Hz or 1 Hz to 600 Hz, 1% accuracy
Gap filter: 0.09 Hz, -3 dB
Non 1X filter: Constant Q notch filter, minimum stopband suppression of -34.9 dB, 60 cpm to 15.8 times operating speed
Smax varies between 0.125 and 15.8 times the operating speed.
1X and 2X vector filters: constant Q filters with a minimum suppression of -57.7 dB in the stopband
accuracy
Gap and Direct: Filtering not included within 0.33% of full scale
1X and 2X: within 0.33% of the normal maximum value of 1% at full scale
Expansion difference and thrust
Within 0.33% of full-scale accuracy
3500/42M alarm
Use rack configuration software to set alarm thresholds for any value measured by the monitor, and set danger setpoints for any two of these values.
Alarm Set Point
For each measurement value, the alarm can be set to 0% to 100% of full scale. When the full-scale range is greater than the set value, the set value will be limited by the sensor range.
Accuracy of alarm set points
0.13% of the required value exists.
3500/42M static value
The measured values used to check the machine are called static values. The 3500/42M preamplifier seismic monitoring instrument returns the following static values:
Radial vibration
Direct, gap, 1X amplitude, 1X
Phase lag, 2X amplitude, 2X
Phase lag, not 1X amplitude and Smax amplitude
Attention: Due to the large number of products from our company, the pictures cannot match each other. Please contact me to confirm the actual product!
Related product videos:
.Our company is committed to through the installation of control systems for spare parts service for you and drive to provide spare parts support, we have a lot of internal inventory, including (DCS, PLC, CNC), the panel controller and HMI, industrial PC, drive, power supply and production control system and servo motor parts, reduce the maintenance cost of spare parts of you, We’ve also released a lot of new hardware to help support your existing installation or take advantage of the latest technology.
Product series：
PLC and DCS system spare modules from world-renowned brands
Allen Bradley (AB) series products from the United States
Schneider series products
General Electric Series Products
Westinghouse Series Products
Selling ABB Robots FANUC Robots、YASKAWA Robots、KUKA Robots、Mitsubishi Robots、OTC Robots、Panasonic Robots、MOTOMAN Robots。
Estinghouse: OVATION system, WDPF system, MAX1000 system spare parts.
Invensys Foxboro: I/A Series system, FBM (Field Input/Output Module) sequential control, ladder logic control, accident recall processing, digital to analog conversion, input/output signal processing, data communication and processing, etc. Invensys Triconex: Redundant fault-tolerant control system, the most modern fault-tolerant controller based on Triple Modular Redundancy (TMR) structure.
Motorola: MVME 162, MVME 167, MVME1772, MVME177 and other series.
Foxboro: I/A Series system, FBM full series (on-site input/output modules)
Sequential control, trapezoidal logic control, accident recall processing, digital to analog conversion, input/output signal processing
Data communication and processing, etc.
Westinghouse: 1C31 series DCS system, CPU, OVATION system, WDPF system
WEStation system spare parts.
Triconex: Redundant fault-tolerant control system, modern fault-tolerant controller based on Triple Modular Redundancy (TMR) structure.
Emerson: various spare parts such as modules, cards, drives, etc.
ABB: PM full range DCS system, IGCT high-voltage inverter series, industrial robot spare parts DSQC series, INFI 90, etc.
Bailey: BRC series DCS system, etc.
Allen Bradley: 1756, 1785, 1771, 1746 full series systems, etc.
Yokogawa: CP series, etc.
Honeywell: TK/TC/CC systems, etc.
Reliance: 57C series, etc.
Schneider: 140 series processors, control cards, power modules, etc.
Modicon: Spare parts for AS series PLC systems.
Siemens MOORE, Siemens Simatic C1, Siemens CNC system, etc.
Motorola: MVME 162, MVME 167, MVME1772, MVME177 and other series.
XYCOM: I/O, VME board, and processor, etc.
GE (General Electric): IC698/IC697 full range of PLC systems, modules, cards, drivers, and other spare parts.
Yaskawa: Servo controller, servo motor, servo drive.
Bosch Rexroth: Indramat, I/O modules, PLC controllers, drive modules, etc.
Woodward: SPC valve position controller, PEAK150 digital controller
XYCOM: I/O, VME board, and processor, etc.
Related products：
| BENTLY | 3500/15 |
| BENTLY | 3500/20 |
| BENTLY | 125840-02 |
| BENTLY | 3500/53 |
| BENTLY | 1X35668 |
| BENTLY | 3500/22M |
| BENTLY | 3500/22M |
| BENTLY | 3500/25 |
| BENTLY | 3500/42M |
[Disclaimer]：
Our company sells new products and discontinued products, and purchases such special products through independent channels. Guizhou Yuanmiao Automation Equipment Co., Ltd. is not an authorized distributor, distributor or representative of the featured products of this website. All product names/product images, trademarks, brands and microlabels used on this website are the property of their respective owners. Product descriptions, descriptions or sales with these name images, trademarks, brands and logos are for identification purposes only and do not represent any association or authorization with any right holders.
Related products: https://www.2mwww.com/product-category/bently/
