BENTLY 3500/53 Overspeed detection system
3500/53 overspeed detection module
The electronic overspeed detection system of Bentley’s 3500 series mechanical inspection system is a highly reliable and responsive redundant tachometer system specifically designed for mechanical overspeed protection. The 3500/53 module can be used to form a 2-for-2 or 3-for-2 (recommended) voting system. The 3500 framework for installing the overspeed detection system requires a redundant power supply.
Each overspeed detection module receives a signal from an eddy current sensor or magnetic sensor, with an input signal range of+10.0V to -24.0V. The signal exceeds this range and is restricted within the module. Suitable for Bentley 3300 8mm eddy current sensor, 3300 16mm high-temperature eddy current sensor (HTPS), 7200 5mm, 8mm, 11mm, and 14mm eddy current sensors, 3300 RAM eddy current sensor, or magnetic sensor.
Bently 3500/53 overspeed protection module is designed as a channel module, which is applicable to overspeed protection applications of two module or three module groups. The module receives speed pulse input signals from proximity sensors or magneto electric sensors and uses this input signal to drive alarms. In order to achieve machine protection purposes, the module provides four types of fast response alarm relay outputs. The 3500 overspeed protection system is configured as a two module two choice meter block or a three module two choice voting setting.
The basic purpose of the 3500 overspeed protection system is to provide 1) machine protection by continuously comparing the current machine speed with the configured alarm setpoint to drive alarms, and 2) important machine speed information to operators and maintenance personnel. Use the 3500 framework configuration software to set alarm setpoints.
When shipped from the factory, the 3500/53 was not configured. When needed, in order to achieve the required monitoring function, the 3500/53 can be installed into the 3500 framework and configured.
As part of the 3500 machine management and protection system, the three channel 3500/53 overspeed protection system provides high reliability overspeed protection. The three channel overspeed protection system includes a 3500 frame, 3500 power supply, frame interface module, and three independent overspeed protection modules. Require three independent sensor inputs. The 3500/53 module can be installed in any slot on the right side of the framework interface module (2-15), but three module groups must be installed adjacent to each other. Only one set of overspeed protection system can be installed in each 3500 framework. The 3500/53 overspeed protection system can be installed in 3500 frames with other 3500 monitoring functions.
The three channel overspeed protection system provides three independent speed monitoring channels. When an alarm is triggered, the three channel overspeed protection system can be configured to provide a voting function of selecting 2 from 3. When equipped with this function, the alarm outputs from each module are compared, and the two modules must be consistent before the relay is driven.
Attention: Due to the large number of products from our company, the pictures cannot match each other. Please contact me to confirm the actual product!
Related product videos:
.Our company is committed to through the installation of control systems for spare parts service for you and drive to provide spare parts support, we have a lot of internal inventory, including (DCS, PLC, CNC), the panel controller and HMI, industrial PC, drive, power supply and production control system and servo motor parts, reduce the maintenance cost of spare parts of you, We’ve also released a lot of new hardware to help support your existing installation or take advantage of the latest technology.
Product series：
PLC and DCS system spare modules from world-renowned brands
Allen Bradley (AB) series products from the United States
Schneider series products
General Electric Series Products
Westinghouse Series Products
Selling ABB Robots FANUC Robots、YASKAWA Robots、KUKA Robots、Mitsubishi Robots、OTC Robots、Panasonic Robots、MOTOMAN Robots。
Estinghouse: OVATION system, WDPF system, MAX1000 system spare parts.
Invensys Foxboro: I/A Series system, FBM (Field Input/Output Module) sequential control, ladder logic control, accident recall processing, digital to analog conversion, input/output signal processing, data communication and processing, etc. Invensys Triconex: Redundant fault-tolerant control system, the most modern fault-tolerant controller based on Triple Modular Redundancy (TMR) structure.
Motorola: MVME 162, MVME 167, MVME1772, MVME177 and other series.
Foxboro: I/A Series system, FBM full series (on-site input/output modules)
Sequential control, trapezoidal logic control, accident recall processing, digital to analog conversion, input/output signal processing
Data communication and processing, etc.
Westinghouse: 1C31 series DCS system, CPU, OVATION system, WDPF system
WEStation system spare parts.
Triconex: Redundant fault-tolerant control system, modern fault-tolerant controller based on Triple Modular Redundancy (TMR) structure.
Emerson: various spare parts such as modules, cards, drives, etc.
ABB: PM full range DCS system, IGCT high-voltage inverter series, industrial robot spare parts DSQC series, INFI 90, etc.
Bailey: BRC series DCS system, etc.
Allen Bradley: 1756, 1785, 1771, 1746 full series systems, etc.
Yokogawa: CP series, etc.
Honeywell: TK/TC/CC systems, etc.
Reliance: 57C series, etc.
Schneider: 140 series processors, control cards, power modules, etc.
Modicon: Spare parts for AS series PLC systems.
Siemens MOORE, Siemens Simatic C1, Siemens CNC system, etc.
Motorola: MVME 162, MVME 167, MVME1772, MVME177 and other series.
XYCOM: I/O, VME board, and processor, etc.
GE (General Electric): IC698/IC697 full range of PLC systems, modules, cards, drivers, and other spare parts.
Yaskawa: Servo controller, servo motor, servo drive.
Bosch Rexroth: Indramat, I/O modules, PLC controllers, drive modules, etc.
Woodward: SPC valve position controller, PEAK150 digital controller
XYCOM: I/O, VME board, and processor, etc.
Related products：
| BENTLY | 3500/15 |
| BENTLY | 3500/20 |
| BENTLY | 125840-02 |
| BENTLY | 3500/53 |
| BENTLY | 1X35668 |
| BENTLY | 3500/22M |
| BENTLY | 3500/22M |
| BENTLY | 3500/25 |
| BENTLY | 3500/42M |
[Disclaimer]：
Our company sells new products and discontinued products, and purchases such special products through independent channels. Guizhou Yuanmiao Automation Equipment Co., Ltd. is not an authorized distributor, distributor or representative of the featured products of this website. All product names/product images, trademarks, brands and microlabels used on this website are the property of their respective owners. Product descriptions, descriptions or sales with these name images, trademarks, brands and logos are for identification purposes only and do not represent any association or authorization with any right holders.
Related products: https://www.2mwww.com/product-category/bently/
