DI Backboard CC-TDIL01 Digital Input Module Backboard

Power distribution within the FSC system and grounding of the FSC system
1) The CP card and WD signal within the system are powered by 5VDC, while the I/O card is powered by 24VDC. 24VDC configuration within the system
The stabilized power supply is distributed to the system through a set of circuit breakers above the CP rack.
2) The FSC system is designed for floating and only requires safe grounding, with a grounding resistance of less than 5 Ω.
3) The schematic diagram of configuring a ground leakage detector ELD within the system is to monitor whether the system is floating.
4) Below the installation board in the system cabinet, a safety ground busbar and an instrument ground busbar are installed. The components that require safe grounding, such as the cabinet casing and rack, are all connected to the safety grounding busbar. When installing on site, only the safety grounding busbar needs to be connected to the grounding electrode; The setting of the instrument grounding busbar is only for the needs of signal shielding grounding, and it is not related to any components within the system.

Power module SPS5710 5119929-100
Analog Input Module Backboard CC-TAIX01 DCS Honeywell
Redundant Backboard CC-TAIX11 DCS
Digital Input Module Backboard CC-TDIL01 DCS Honeywell
24VDC Digital Redundant Input Module Installation Backboard CC-TDIL11 EPKS300
CC-TAOX11 Analog Redundant Output Module Installation Backboard DCS System PKS System
CC-PWRR01 Redundant C300 Power Supply DCS System
MU-KLAM09 Low level Analog Input Acquisition Module Connection Cable DCS System
CC-IP0101 Profibus Communication Module DCS System
Simulated output module installation base plate DCS system CC-TAOX01
Main CPU rack 6-slot DCS system 2MLR-M06P
Profibus Communication Module Backboard DCS System CC-TCNT01
Controller Memory CC-SCMB02
DCS system 24V power supply DCS system CC-PWRB01
4VDC Digital Output Module DCS System CC-PDOB01
Simulated Input Module Installation Backboard DCS System CC-TAIX01
Low level analog input acquisition module DCS system CC-PAIM01
C300 controller CC-PCNT02
Low level analog input acquisition module installation bottom board DCS system CC-TAIM01
High level analog input module – HART DCS system CC-PAIH02
Analog input module DCS system CC-PAIX02

Multifunctionality: Controller modules typically have multiple functions that can be used for different automation and control tasks.
Communication interface: This type of module is usually equipped with multiple communication interfaces to achieve data exchange with other devices, PLCs, or control systems.
Real time performance: For many industrial applications, real-time performance is crucial, and the controller module may have high real-time performance to ensure timely data processing and decision-making.
Programmability: Controller modules can typically achieve specific control logic and operations through programming.
Security: The controller module may have security features to ensure the confidentiality and integrity of the control system’s data and operations.