TRICONEX 2658 Card module
TRICONEX 2658 is an industrial control card that belongs to one of the product lines of the TRICONEX brand. TRICONEX is a brand under Schneider Electric that focuses on providing highly reliable safety control systems.
TRICONEX 2658 industrial control card is a PLC/DCS spare module used in industrial automation and control systems. PLC represents Programmable Logic Controller, while DCS represents Distributed Control System. These systems are widely used in various industries for controlling and monitoring equipment and processes.
The TRICONEX 2658 industrial control card may have the following characteristics and functions:
Input/Output (I/O) Function: This card typically has multiple digital input and output interfaces, used to connect sensors, actuators, and other external devices for signal acquisition and control output.
Spare parts module: TRICONEX 2658 is designed as a spare parts module, which can be used to replace faulty or damaged original modules to maintain the continuous operation of the system.
Reliability and Safety: The TRICONEX brand emphasizes reliability and safety, so 2658 industrial control cards may have fault detection, fault tolerance, and safety protection mechanisms to ensure system stability and reliability.
Communication interface: This card may be equipped with a communication interface for data exchange and communication with other control devices.
If you need to inquire or make a purchase, please send the product model to my email or call me directly.
General interface and usage of TRICONEX 3701 electric drive system
TRICONEX 3701 Cyclic Synchronous Control Mode – Cyclic Synchronous Position, Cyclic Synchronous Speed, and Cyclic Synchronous Torque – is a standardized operating mode for transmission, defined in the CiA 402 Profile Specification, used for CANopen device configuration files for drive and motion control, and included in the IEC 61800-7 standard, Adjustable Speed Electric Drive Systems – Part 7: General Interface and Use of Electric Drive Systems.
These control modes are typically used in multi axis systems that require coordinated motion and can be applied to various Ethernet networks, including Ethernet modem, CANopen (CoE) over Ethernet, and Ethernet POWERLINK.
The key feature of TRICONEX 3701 cycle synchronization control (position, speed, and torque) is that the host controller (such as EtherCAT master) generates trajectories and obtains this function from the driver. The host sends target parameters (position, speed, or torque) to the driver through real-time, cyclic synchronous communication based on the PDO update cycle.
Circular synchronous communication refers to the continuous sending of time synchronized messages by the host and driver at fixed intervals (loops) according to standard protocols.
TRICONEX 3701 handles data objects or PDOs for real-time, high priority control, and communication of status information. The transmission of PDO occurs based on trigger events defined in the device’s object dictionary. One of the triggering events of PDO is synchronous loop transmission, where PDO is transmitted upon receiving a synchronous message.
———————————————————-
[Disclaimer]
Our company sells new products and discontinued products, and purchases such special products through independent channels. Guizhou Yuanmiao Automation Equipment Co., Ltd. is not an authorized distributor, distributor or representative of the featured products of this website. All product names/product images, trademarks, brands and microlabels used on this website are the property of their respective owners. Product descriptions, descriptions or sales with these name images, trademarks, brands and logos are for identification purposes only and do not represent any association or authorization with any right holders.
