BENTLY 330180-51-05 Proximitor
Bentley 330180-51-05 Proximitor Detector
Bentley 330180-51-05 Proximitor Detector Product Details:
Bentley 330180-51-05 is a preamplifier detector commonly used in industrial monitoring and control applications. A preamplifier detector is a sensor or detector used to detect physical or chemical changes in order to monitor processes or environmental conditions in real-time.
Due to my inability to provide detailed information on specific products, the following are some general information and features about the preamplifier detector:
Detection function: Proximitor detectors are usually used to detect specific physical or chemical changes, such as temperature, pressure, flow rate, liquid level, gas concentration, vibration, etc. The specific detection function depends on the application requirements.
Real time monitoring: These detectors are usually able to monitor changes in real time and provide immediate feedback. This is crucial for automation control, safety monitoring, and process optimization.
Data output: Detectors typically generate data output, which can be analog signals (such as voltage or current) or digital signals, in order to transmit data to monitoring systems, PLCs (programmable logic controllers), or other control devices.
Industrial standards: Proximitor detectors typically comply with industrial standards to ensure their reliability, durability, and safety in industrial environments.
Application areas: These detectors are widely used in various industrial fields, including chemical, petroleum and natural gas, electricity, manufacturing, water treatment, etc. They are used to monitor process variables, equipment status, and environmental conditions.
Customized configuration: Some preamplifier detectors can be configured and calibrated according to specific application requirements to ensure their accuracy and reliability.
3500/22M Features
In a 3500 rack, the TDI is located in the slot next to the power supply. In order to continuously collect steady-state and transient dynamic (waveform) data and transmit this data to the host software through an Ethernet link, it interacts with M-series monitors (3500/40M, 3500/42M, etc.).
TDI has traditional static data collection capabilities. However, TDI can also use optional channels to enable disk recording of dynamic, high-resolution transient data.
Function Description
The 3500 rack includes communication processing functions for TDI. Although TDI performs some tasks shared by the entire rack, it is not a critical component of the monitoring system and is not related to the effectiveness of autonomous mechanical protection in monitoring the entire system.
Each 3500 rack requires a TDI or RIM, which always occupies slot 1. (Next to the power supply).
The link between the 3500 monitoring system and compatible software is called the 3500/22M Transient Data Interface (TDI) (System 1 Status Monitoring and Diagnostic Software and 3500 System Configuration Software). TDI combines 3500/20 Rack Interface Module (RIM functionality) with communication processors (such as TDXnet) to collect data.
place
In a 3500 rack, the TDI is located in the slot next to the power supply. In order to continuously collect steady-state and transient dynamic (waveform) data and transmit this data to the host software through an Ethernet link, it interacts with M-series monitors (3500/40M, 3500/42M, etc.). TDI has traditional static data collection capabilities. However, TDI can also use optional channels to enable disk recording of dynamic, high-resolution transient data.
The 3500 rack includes communication processing functions for TDI. Although TDI performs some tasks shared by the entire rack, it is not a critical component of the monitoring system and is not related to the effectiveness of autonomous mechanical protection in monitoring the entire system.
Each 3500 rack requires a TDI or RIM, which always occupies slot 1. (Next to the power supply).
Configure Keylock
It is used to switch 3500 racks between “RUN” and “PROM” modes. The RUN mode prevents configuration modifications and allows the rack to operate normally. The rack can be configured locally or remotely, and can still operate normally in Program mode. By removing the key from any position on the rack, the switch can remain in the running or programming position. You can prevent unnecessary rack reconfiguration by locking the switch in the running position. At any time when it is necessary to remotely reconfigure the rack, the switch can be locked in the PROM position.
I/O module signal common terminal
Both versions of the TDI I/O module now have a 2-pin connector used to connect the signal common to the single point instrument ground of the rack. After performing this operation, the signal common terminal should be connected to the
Product recommendation:
Bently vibration probe 330106-05-30-10-02-00
Bently vibration probe 330500-00-00
Bently vibration probe 330905-00-12-10-10-CN
Bently vibration probe 330907-05-30-10-02-00
Bently vibration probe 330910-00-03-50-02-00
Bently vibration probe secondary instrument 105M6193-01
Bently axis displacement transmitter 991-25-50-01-00
Bently axis displacement probe 330104-00-12-10-02-CN
Bently shaft vibration probe 330104-00-06-10-02-00
Bently speed probe 70085-1010-330 \ AI-TEK
Bently 3300XL Extension Cable 330130-045-00-00
Bently sensor 330101-00-24-10-02-CN
Bently sensor 330101-00-36-10-02-CN
Bently sensor 330101-00-48-50-02-CN
Bently sensor 330130-045-03-05
Bently sensor 330130-045-03-CN
Bently sensor 9200-01-01-10-00
Bently cable 16710-20
Bently cable 330130-040-02-CN
Bently cable 330130-040-02-05
Bently eddy current sensor probe 330103-00-05-10-02-00
Bently module 3500/05-02-04-00-00
Bently module 3500/42-04-CN
Bently module 3500/22-01-02-CN
Bently Proximitor 330180-12-CN
Bently Proximitor 330180-90-CN
Bently Proximitor 330180-51-CN
Bently Proximitor 330180-51-05
Bently Proximitor 330180-X1-CNMOD.: 143416-99
Bently Proximitor 330730-080-01-00
Bently Proximitor 330780-50-00
Bently Proximitor 330780-51-00
Bently Proximitor 330850-51-CN
Bently Proximitor 330850-51-05
[Disclaimer]
Our company sells new products and discontinued products, and purchases such special products through independent channels. Guizhou Yuanmiao Automation Equipment Co., Ltd. is not an authorized distributor, distributor or representative of the featured products of this website. All product names/product images, trademarks, brands and microlabels used on this website are the property of their respective owners. Product descriptions, descriptions or sales with these name images, trademarks, brands and logos are for identification purposes only and do not represent any association or authorization with any right holders.
