BENTLY 125736-01 I/O Module
Product details of power input module:
BENTLY 125736-01 is a power input module produced by Bentley Nevada, commonly used in industrial monitoring and control systems. Bentley Nevada is a company dedicated to providing vibration monitoring and mechanical equipment health management solutions, and its products are commonly used in the monitoring and maintenance of rotating mechanical equipment.
Here are some possible information about the BENTLY 125736-01 power input module:
Power input and distribution: Power input modules are typically used to distribute power inputs to different parts of monitoring and control systems for power supply to devices and sensors. This helps to ensure stable power supply to the system.
Equipment Health Monitoring: In vibration monitoring and equipment health management applications, the power input module may be used to power vibration sensors, accelerometers, and other monitoring devices to monitor the operation status of rotating mechanical equipment.
Data collection: This type of module can also be used in data collection systems to ensure that sensors and data collection devices have sufficient power to accurately record and analyze data.
Reliability and stability: Power input modules typically have high reliability and stability to ensure continuous operation in industrial environments and prevent power outages from affecting equipment and systems.
Suitable for vibration monitoring: Bentley Nevada’s products are mainly used for vibration monitoring and equipment health management, so this power input module may be specifically designed for use with vibration sensors and related equipment.
The 3500/25 improved keyphase module is a half height, 2-channel module used to provide keyphase signals to the monitor modules in the 3500 rack. This module receives input signals from eddy current sensors or electromagnetic sensors and converts this signal into a digital key phase signal, which can indicate when the key phase mark on the shaft passes through the key phase probe. Each key phase module has 2 input channels, and the 3500 mechanical protection system can install 2 key phase module to receive 4 key phase signals.
Note: The key phase signal is a pulse signal from the rotating shaft or gear, which provides accurate time measurement for each revolution or multiple rotations. Allow the 3500 monitor module and external fault diagnosis equipment to measure vector parameters such as 1X amplitude and phase.
Each keyphasor module can receive 2 signals from eddy current sensors or electromagnetic sensors. The input signal range is -0.8V to -21.0V (for non insulated I/O modules) and+5V to -11V (for insulated I/O modules). The amplitude can be limited within the module to ensure that the signal does not exceed this range. Passive electromagnetic sensors require a shaft speed greater than 200rpm (3.3Hz). On the front panel of the frame, there are two buffer key phase output signals through coaxial connectors. Two buffer key phase outputs can also be obtained on the back of the frame through European connectors. Front panel LED OK indicator light: can indicate that a fault has been detected within the keyphasor module.
TX/RX indicator light: emits an indicator when the keyphasor module communicates with the Rack Interface Module (RIM).
1) Buffered sensor output
2) I/O module, insulated internal terminals
3) I/O module, insulated external terminals
4) I/O module, non insulated internal terminals
5) I/O module, non insulated external terminals
6) I/O module with safety barrier, internal terminals
Product recommendation:
Bently vibration probe 330106-05-30-10-02-00
Bently vibration probe 330500-00-00
Bently vibration probe 330905-00-12-10-10-CN
Bently vibration probe 330907-05-30-10-02-00
Bently vibration probe 330910-00-03-50-02-00
Bently vibration probe secondary instrument 105M6193-01
Bently axis displacement transmitter 991-25-50-01-00
Bently axis displacement probe 330104-00-12-10-02-CN
Bently shaft vibration probe 330104-00-06-10-02-00
Bently speed probe 70085-1010-330 \ AI-TEK
Bently 3300XL Extension Cable 330130-045-00-00
Bently sensor 330101-00-24-10-02-CN
Bently sensor 330101-00-36-10-02-CN
Bently sensor 330101-00-48-50-02-CN
Bently sensor 330130-045-03-05
Bently sensor 330130-045-03-CN
Bently sensor 9200-01-01-10-00
Bently cable 16710-20
Bently cable 330130-040-02-CN
Bently cable 330130-040-02-05
Bently eddy current sensor probe 330103-00-05-10-02-00
Bently module 3500/05-02-04-00-00
Bently module 3500/42-04-CN
Bently module 3500/22-01-02-CN
Bently Proximitor 330180-12-CN
Bently Proximitor 330180-90-CN
Bently Proximitor 330180-51-CN
Bently Proximitor 330180-51-05
Bently Proximitor 330180-X1-CNMOD.: 143416-99
Bently Proximitor 330730-080-01-00
Bently Proximitor 330780-50-00
Bently Proximitor 330780-51-00
Bently Proximitor 330850-51-CN
Bently Proximitor 330850-51-05
[Disclaimer]
Our company sells new products and discontinued products, and purchases such special products through independent channels. Guizhou Yuanmiao Automation Equipment Co., Ltd. is not an authorized distributor, distributor or representative of the featured products of this website. All product names/product images, trademarks, brands and microlabels used on this website are the property of their respective owners. Product descriptions, descriptions or sales with these name images, trademarks, brands and logos are for identification purposes only and do not represent any association or authorization with any right holders.
