BENTLY 132419-01 Monitoring Card

BENTLY 132419-01 Monitoring Card

135137-01 is a position/O module with internal terminals, used for proximitors, RPTs, or DC LVDTs. It was designed and developed by Bentley Nevada. It is part of the 3500/45 monitoring system. The position monitor is a 4-channel device that can receive inputs from rotary potentiometers, proximity sensors, DC linear variable differential transformers, AC linear variable differential transformers, and rotary position sensors (RPTs).
The main function of the position monitor is to provide the following functions:
● By continuously comparing monitoring parameters and predefined alarm settings, alarms are triggered to protect the machine.
● Important machine knowledge for operation and maintenance personnel
The 3500/15 AC and DC power supplies accept a wide range of input voltages and convert them into voltages acceptable to other 3500 modules. The following power supplies are available for the 3500 series machine protection system: – General AC
Power supply – High voltage DC power supply – Low voltage DC power supply

The GE/Bently Nevada 3500/05 system rack design can accommodate all 3500 monitor modules and rack power supplies. It allows various 3500 modules to communicate with each other and allows power to be allocated to each module as needed. Full size rack: 19 inch EIA rack with 14 available module slots 2. Mini rack: 12 inch rack with 7 available module slots. 3500 racks are manufactured in three formats: 1. Panel installation: This rack format is installed on a rectangular cut in the panel and secured to the panel using the fixture provided with the rack. The wiring connections and I/O modules can be operated from the rear of the rack.
2. Rack installation: This rack format installs 3500 racks on 19 inch EIA rails_ On. The wiring connections and I/O modules can be operated from the rear of the rack. 3. Partition installation: When it is not possible to operate from the rear of the rack, this rack format can install the rack on a wall or panel. The wiring connections and I/O modules can be accessed from the front of the rack. The 3500/05 micro rack does not have this format. The power supply and rack interface module must be located in the leftmost rack position. The remaining 14 rack positions (7 rack positions for micro racks) can be used for any module combination.
Features: – accommodates all 3500 monitor modules and rack power supplies – Manufactured in (2) sizes: Full size rack and micro rack in (3) formats: Panel mounted, rack mounted, and partition mounted -7 or 14 rack positions

The Bently Nevada 3500/15 power supply is a half height module that must be installed in the designated slot on the left side of the rack. A 3500 rack can contain one or two AC and DC power supplies in any combination. any
The power supply can supply power to the entire rack. When two power supplies are installed in one rack, one in the lower slot serves as the main power supply and the other in the upper slot serves as the backup power supply. If installed,
The second power supply is a backup of the main power supply. As long as a second power supply is installed, removing or inserting any power module will not interrupt the operation of the rack. The 3500/15 power supply accepts a wide range of input voltages,
And convert it to a voltage acceptable to other 3500 modules

[Disclaimer]
Our company sells new products and discontinued products, and purchases such special products through independent channels. Guizhou Yuanmiao Automation Equipment Co., Ltd. is not an authorized distributor, distributor or representative of the featured products of this website. All product names/product images, trademarks, brands and microlabels used on this website are the property of their respective owners. Product descriptions, descriptions or sales with these name images, trademarks, brands and logos are for identification purposes only and do not represent any association or authorization with any right holders.