BENTLY 3500/25 Channel module

BENTLY 3500/25 Channel module

125840-02 has added high-performance PLCs and expanded the existing controller PLC platform. The significant improvement in performance is attributed to the increase in computing power and memory capacity. This new performance class can achieve a cycle time of 25 seconds per 1000 rows of STL. By introducing high-performance PLC, 125840-02 has expanded its modular control system for PLC and motion control tasks. The characteristic of high-performance PLC is its compact design, which is part of the controller PLC series. The I/O module can be directly connected to the controller PLC without the need for additional bus couplers. The control concept of high-performance PLC can be fully integrated into all Bau ü ller control platforms, and its software is 100% compatible. The controller PLC series has up to five different fieldbus module interfaces for PLCs.

For example, these can be EtherCAT master/slave or CANopen master/slave interfaces, or Ethernet interfaces open to traditional IT environments, such as OPC server communication. The 32-bit RISC CPU has a performance of 667 MHz. 64 MB flash memory is available for Runtime system, IEC programs, and cams. Even the standard controller PLC can achieve a cycle time of 100 seconds per 1000 rows of STL. However, high-performance PLCs have 25 seconds per 1000 rows of STL. The ProMaster engineering framework is used to configure PLC systems, network components, or individual machine units. Regardless of the hardware platform chosen, users can use ProMaster to intuitively create entire machine applications.

135137-01 is a position/O module with internal terminals, used for proximitors, RPTs, or DC LVDTs. It was designed and developed by Bentley Nevada. It is part of the 3500/45 monitoring system. The position monitor is a 4-channel device that can receive inputs from rotary potentiometers, proximity sensors, DC linear variable differential transformers, AC linear variable differential transformers, and rotary position sensors (RPTs).
The main function of the position monitor is to provide the following functions:
● By continuously comparing monitoring parameters and predefined alarm settings, alarms are triggered to protect the machine.
● Important machine knowledge for operation and maintenance personnel
The 3500/15 AC and DC power supplies accept a wide range of input voltages and convert them into voltages acceptable to other 3500 modules. The following power supplies are available for the 3500 series machine protection system: – General AC
Power supply – High voltage DC power supply – Low voltage DC power supply

The Bently Nevada 3500/15 power supply is a half height module that must be installed in the designated slot on the left side of the rack. A 3500 rack can contain one or two AC and DC power supplies in any combination. any
The power supply can supply power to the entire rack. When two power supplies are installed in one rack, one in the lower slot serves as the main power supply and the other in the upper slot serves as the backup power supply. If installed,
The second power supply is a backup of the main power supply. As long as a second power supply is installed, removing or inserting any power module will not interrupt the operation of the rack. The 3500/15 power supply accepts a wide range of input voltages,
And convert it to a voltage acceptable to other 3500 modules

[Disclaimer]
Our company sells new products and discontinued products, and purchases such special products through independent channels. Guizhou Yuanmiao Automation Equipment Co., Ltd. is not an authorized distributor, distributor or representative of the featured products of this website. All product names/product images, trademarks, brands and microlabels used on this website are the property of their respective owners. Product descriptions, descriptions or sales with these name images, trademarks, brands and logos are for identification purposes only and do not represent any association or authorization with any right holders.