GE IS220PDIAH1B control module
We know that reliability is very important for industrial production. Every producer wants to keep his production line in good condition, but the fact tells us that it is impossible. We can try to avoid equipment problems and reduce the possibility of problems. At this time, the PLC control system is much better than the original relay control. In fact, we can see this from the appearance of both sides. After all, there are more circuits in the relay control system, and the installation and removal are more complex. Many lines are densely interwoven, which is not only easy to damage the lines due to mutual friction, but also easy to interfere with the signal electromagnetic wave in the other line. The PLC equipment is relatively simple and rule-based, and is not easy to be damaged by self-interference.
For systems with the same I/O points, the cost of using PLC controller is lower than that of using DCS (about 40% can be saved). PLC has no special operation station, and its software and hardware are universal, so the maintenance cost is much lower than that of DCS. A PLC controller can receive thousands of I/O points (up to more than 8000 I/Os). If the controlled object is mainly equipment interlocking with few loops, PLC is more suitable. Because PLC uses general monitoring software, it is easier to design enterprise management information system.
| GE | IC200GBI001 |
| GE | IC3645LXCD1 |
| GE | IC660BBD025 |
| GE | IC660EBD020 |
| GE | IC660ELB912G |
| GE | IC660ELD100A |
| GE | IC660TSA100 |
| GE | IC670CBL001 |
| GE | IC670CHS001 |
| GE | IC670CHS002 |
[Disclaimer]
Our company sells new products and discontinued products, and purchases such special products through independent channels. Guizhou Yuanmiao Automation Equipment Co., Ltd. is not an authorized distributor, distributor or representative of the featured products of this website. All product names/product images, trademarks, brands and microlabels used on this website are the property of their respective owners. Product descriptions, descriptions or sales with these name images, trademarks, brands and logos are for identification purposes only and do not represent any association or authorization with any right holders.
