ABB CI867K01 3BSE043660R1 modular

ABB CI867K01 3BSE043660R1 modular

In addition to input module and output module, there is also a module with both input circuit and output circuit. The input and output points are generally the same. This module makes it more convenient for users to determine the hardware configuration of PLC.
The rated value of the output current is related to the nature of the load. For example, the relay output module of FX can drive the resistive load of 2A/220VAC, but only the inductive load of 80VA/220VAC and the incandescent lamp of 100W. The rated output current is also related to temperature. When the temperature rises, the rated output current decreases. Some PLCs provide relevant curves.
Due to heat dissipation, some output modules need to consider the total current of several output points belonging to the same common point (COM). For example, the rated output current of the transistor output module of FX is 0.8A/COM.
The use voltage of the relay output module is * * *, the conduction voltage drop is small, and the ability to withstand transient overvoltage and overcurrent is strong, but the action speed is slow, and the service life (action times) is limited. If the on-off change of load is not very frequent, it is recommended to choose relay type first.
Transistor type and bidirectional thyristor type modules are used for DC load and AC load respectively. They have high reliability, fast response speed and long service life, but their overload capacity is slightly poor.

The AI830/AI830A RTD input module has eight channels for measuring temperature through a resistive element (RTD). With 3-wire connection. All RTDs must be isolated from the ground.
AI830/AI830A can be used with Pt100, Cu10, Ni100, Ni120 or resistance sensors. Perform linearization and temperature to Celsius or Fahrenheit conversion on the module.
Each channel can be configured separately. The MainsFreq parameter is used to set the power filter cycle time. This will provide a notch filter at (50 Hz or 60 Hz)
。
Features and benefits of ABB Bailey AI830A analog input module:
8 channels for RTD (Pt100, Cu10, Ni100 and Ni120 and resistor) input
3-wire connection with RTD
14-bit resolution
It monitors the input for open circuit and short circuit, and has input grounding sensor
The above is the introduction of “ABB Bailey PM851AK01 processor module of industrial control procurement network”. ABB is a manufacturer in the field of electric power and automation technology. ABB’s technology can help the performance of electric power, public utilities and industrial customers, and at the same time has a negative impact on. ABB has * * * product lines, including a full range of power transformers and distribution transformers, high, medium and low voltage switchgear products, AC and DC transmission and distribution, power automation, various measuring equipment and sensors, real-time control and, robot software and hardware, energy-saving motors and transmission, power, conversion and synchronization, and fuse and switch equipment to protect power safety. These products have been * * * used in industry, commerce, power and public utilities。

ABB CI867K01 3BSE043660R1 modular

[Disclaimer]
Our company sells new products and discontinued products, and purchases such special products through independent channels. Guizhou Yuanmiao Automation Equipment Co., Ltd. is not an authorized distributor, distributor or representative of the featured products of this website. All product names/product images, trademarks, brands and microlabels used on this website are the property of their respective owners. Product descriptions, descriptions or sales with these name images, trademarks, brands and logos are for identification purposes only and do not represent any association or authorization with any right holders.