GE 8920-PS-DC control module
features:
PAC8000 I/O is a fully modular I/O solution suitable for general and hazardous area applications. It provides a variety of I/O functions and has an open architecture. By selecting the appropriate type of bus interface module (BIM) or controller, it can communicate with various field buses.
The field terminal (one for each I/O module) is stuck on the carrier and accepts field wiring, without additional terminals or connections. If damaged on site, they can be easily replaced. The mechanical key control system ensures the safety of the equipment.
The carrier forms the physical and electrical backbone of the PAC8000 by providing and installing it on the flat plate or T-type or G-type DIN rail. They support and interconnect BIMs or controllers, power supplies, I/O modules and field terminals, and carry the address, data and power cables of the internal Railbus
5A capacity
Support load sharing for redundancy
The GE GTO grid driver board DS200GGDAG1A has two 3-pin connectors and two bayonet connectors. The GE GTO grid drive board DS200GGDAG1A also contains two sets of four LEDs. Each group has 1 red LED, 1 amber LED and 2 LEDs on. When the amber LED is activated, the GE GTO control panel control program DS200GGAG1A error is displayed. To diagnose the error, run the drive to enable the diagnostic panel on the drive.
You can access the diagnostic tools in the user interface of the driver menu. Use the keyboard on the control to enable the option keys until the diagnostic tool. Use Move on the keyboard to select it and select the option to run the tool.
Diagnose all processes in the relevant circuit board and generate reports on the operation of components. You can use tools that save connectors and connectors to drives and laptops to provide inspection files for execution. After saving, you compare the report performed before the operation. Diagnostic results.
The control panel is also used to provide local control of the drive. You can stop and start the motor. You can also control the speed of the motor and use predefined parameters to control the operation of the drive. The control panel is also used to edit the configuration. The configuration defines the operation of the drive, including the direction and speed of the motor.
| GE | IC200GBI001 |
| GE | IC3645LXCD1 |
| GE | IC660BBD025 |
| GE | IC660EBD020 |
| GE | IC660ELB912G |
| GE | IC660ELD100A |
| GE | IC660TSA100 |
| GE | IC670CBL001 |
| GE | IC670CHS001 |
| GE | IC670CHS002 |
[Disclaimer]
Our company sells new products and discontinued products, and purchases such special products through independent channels. Guizhou Yuanmiao Automation Equipment Co., Ltd. is not an authorized distributor, distributor or representative of the featured products of this website. All product names/product images, trademarks, brands and microlabels used on this website are the property of their respective owners. Product descriptions, descriptions or sales with these name images, trademarks, brands and logos are for identification purposes only and do not represent any association or authorization with any right holders.
